Angle Brackets - Galvanised
Angle Brackets - Galvanised

Angle Brackets - Galvanised

Angle brackets are suitable for supporting or bracing purposes and are galvanised for outdoor use.


Product Code A (mm) B (mm) C (mm) Thickness (mm)    Load Rating (kg)
AG05                  75 50 20 3.5 45
AG07 100 75 20 4 150
AG09 125 100 20 4 75
AG11 150 125 20 4 40
AG14 200 150 25 4.5 30
AG18 250 200 25 4.5 25
B11464 40 40 40 5  
B11465 40 80 40 5  
B11471 50 50 20 4  
B11466 50 50 40 5  
B11472 75 50 20 4  
B11469 75 50 50 4  
B11468 75 75 40 5  
B11467 75 150 75 5  
B11461 100 75 20 5  
B11460 100 100 50 4.5  
B11463 150 150 75 6  
B11475 290 75 50 4  

Load rating test specifications:

  • 415mm distance between 2 brackets
  • Bracket is fastened to wall using shortest side of bracket
  • Brackets tested in the orientation below:

Weight capacity of all shelf brackets will always be dependent on the fixing to the wall, distance between brackets and the condition of the wall, the brackets are being fitted to. Weight should be distributed evenly across shelf.

 

Angle brackets are suitable for supporting or bracing purposes and are galvanised for outdoor use.

  • For bracing or added support
  • Galvanised, suitable for outdoor use
  • Available in a variety of sizes
  • Predrilled for fasteners

Important:

Brackets should only be attached to wall studs if attaching to plaster board walls, or brickwork/masonry (not mortar or grouting).

Appropriate heavy duty fasteners should be used.

Do not use plastic wall plugs to fix brackets to walls under any circumstances.

Make sure the bracket is securely fixed to the wall and all screws are fastened tightly.

 

The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided falls within the normal range of product properties and relate only to the specific item designated. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability for your particular purposes. Since RCR cannot anticipate all variations in actual end-use conditions, RCR makes no warranties and assumes no liability in connection with any use of this information.

Bunnings Warehouse