Flat Stayed Heavy Duty Bracket - Galvanised
Flat stayed heavy duty bracket in a galvanised finish. Large pre-drilled slots for easy alignment. The bracket is suitable for supporting shelving or bracing where additional strength is required.
|Product Code||A (mm)||B (mm)||C (mm)||Thickness (mm)||Load Rating (kg)|
Load rating test specifications:
- Load rating tested at 415mm distance between 2 brackets
- Bracket is fastened to wall using shortest side of bracket
- Brackets tested in the orientation below:
Weight capacity of all shelf brackets will always be dependent on the fixing to the wall, distance between brackets and the condition of the wall, the brackets are being fitted to. Weight should be distributed evenly across shelf.
Stayed flat galvanised heavy duty bracket is made from high quality steel. Large pre-drilled slots for easy alignment. The bracket is suitable for supporting shelving or bracing where additional strength is required. Galvanised finish aids in the protection from the elements making it suitable for outdoor use. The brackets are available in a variety of sizes that are suitable for larger projects.
- For supporting or bracing where additional strength is required
- Straight flat stay with slots to make shelf alignment easy
- Hot dipped galvanised, suitable for outdoor use
- Pre-drilled for fasteners
Brackets should only be attached to wall studs if attaching to plaster board walls, or brickwork/masonry (not mortar or grouting).
Appropriate heavy duty fasteners should be used.
Do not use plastic wall plugs to fix brackets to walls under any circumstances.
Make sure the bracket is securely fixed to the wall and all screws are fastened tightly.
The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided falls within the normal range of product properties and relate only to the specific item designated. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability for your particular purposes. Since RCR cannot anticipate all variations in actual end-use conditions, RCR makes no warranties and assumes no liability in connection with any use of this information.
© 2017 RCR International Pty Ltd