Straight Stayed Brackets - Galvanised
Straight Stayed Brackets - Galvanised
Straight Stayed Brackets - Galvanised
Straight Stayed Brackets - Galvanised
Straight Stayed Brackets - Galvanised
Straight Stayed Brackets - Galvanised
Straight Stayed Brackets - Galvanised
Straight Stayed Brackets - Galvanised

Straight Stayed Brackets - Galvanised

Straight stayed brackets available in galvanised finish. Strong and durable stay bracket provides good stability and can be used for shelf projects around the home, garage, shed or office, can be used outdoors. Large pre-drilled slots for easy alignment.


Product Code A (mm) B (mm) C (mm) Thickness (mm)    Load Rating (kg)
SSG400              400 300 50 6 400
SSG500 500 400 50 6 200
SSG600 600 450 50 6 150
SG1830 250 200 30 3.5 300
SG2430 300 300 30 4 300
SG3030 400 350 30 4 300
SG3630 500 400 30 4.5 400
SG432 500 300 40 4 350
SG436 600 300 40 4.5 250

Load rating test specifications:

  • Load rating tested at 415mm distance between 2 brackets
  • Bracket is fastened to wall using shortest side of bracket
  • Brackets tested in the orientation below:

Weight capacity of all shelf brackets will always be dependent on the fixing to the wall, distance between brackets and the condition of the wall, the brackets are being fitted to. Weight should be distributed evenly across shelf.

 

Straight stayed brackets available in galvanised finish. Strong and durable stay bracket provides good stability and can be used for shelf projects around the home, garage, shed or office, can be used outdoors. Large pre-drilled slots for easy alignment.

  • For supporting or bracing where additional strength is required
  • Stay with welded joins for added strength
  • Hot dipped galvanised, suitable for outdoor use
  • Pre-drilled for fasteners

Important:

Brackets should only be attached to wall studs if attaching to plaster board walls, or brickwork/masonry (not mortar or grouting).

Appropriate heavy duty fasteners should be used.

Do not use plastic wall plugs to fix brackets to walls under any circumstances.

Make sure the bracket is securely fixed to the wall and all screws are fastened tightly.

 

The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided falls within the normal range of product properties and relate only to the specific item designated. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability for your particular purposes. Since RCR cannot anticipate all variations in actual end-use conditions, RCR makes no warranties and assumes no liability in connection with any use of this information.

Home Hardware Bunnings Warehouse Mitre 10