Galvanised Heavy Duty Angle Brackets Group 500x500 1

Heavy Duty Angle Brackets – Galvanised

Galvanised heavy duty angle brackets are suitable for supporting or bracing where additional strength is required.

Builders Angle

AG408100100404100

Product Code	A (mm)	B (mm)	C (mm)	Thickness (mm)	Load Rating (kg)
AG403	40	40	40	3.5	170
SAG03	40	40	40	4	450
SAG15	40	80	40	4	150
AG404	50	50	40	3.5	170
SAG05	50	50	50	4	500
AG50	50	50	75	4	600
SAG17	50	100	50	4.5	500
SAG21	75	130	75	4.5	350
SAG31	75	75	40	4.5	500
AG75	75	75	75	4	500
AG406	75	75	40	3.5	150
AG100	100	100	75	4.5	300
AG130	130	130	75	4.5	200

Load rating test specifications:

Load rating tested at 415mm distance between 2 brackets
Bracket is fastened to wall using shortest side of bracket
Brackets tested in the orientation below:

Weight capacity of all shelf brackets will always be dependent on the fixing to the wall, distance between brackets and the condition of the wall, the brackets are being fitted to. Weight should be distributed evenly across shelf.

Galvanised heavy duty angle brackets are suitable for supporting or bracing where additional strength is required.

Features

For bracing or added support
Galvanised, suitable for outdoor use
Available in a variety of sizes
Predrilled for fasteners

Important:

Brackets should only be attached to wall studs if attaching to plaster board walls, or brickwork/masonry (not mortar or grouting).
Appropriate heavy duty fasteners should be used.
Do not use plastic wall plugs to fix brackets to walls under any circumstances.
Make sure the bracket is securely fixed to the wall and all screws are fastened tightly.

The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided falls within the normal range of product properties and relate only to the specific item designated. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability for your particular purposes. Since RCR cannot anticipate all variations in actual end-use conditions, RCR makes no warranties and assumes no liability in connection with any use of this information.