Make-A-Bracket Galvanised Flat 1 and 2mm

Make-A-Bracket 1 and 2mm Flat, perforated steel stripping available in various sizes.

MAB Flat

Product Code A (mm) B (mm) T (mm)
MABF2021 20 200 1
MABF2041 40 200 1
MABF2061 60 200 1
MABF2081 80 200 1
MABF2101 100 200 1
MABF2201 200 200 1
MABF6021 20 600 1
MABF6041 40 600 1
MABF6061 60 600 1
MABF6081 80 600 1
MABF6101 100 600 1
MABF2022 20 200 2
MABF2042 40 200 2


Load rating test specifications:

  • Load rating tested at 415mm distance between 2 brackets
  • Bracket is fastened to wall using shortest side of bracket
  • Brackets tested in the orientation below:


Stayed Bracket Orientation for Load Rating

Weight capacity of all shelf brackets will always be dependent on the fixing to the wall, distance between brackets and the condition of the wall, the brackets are being fitted to. Weight should be distributed evenly across shelf.

Perforated steel stripping available in various size angles and flats enable a multitude of brackets of all sizes to be made in seconds – on site with no more than the most basic tools. Between each row of round holes is a row of diamond holes designed to make cutting and bending easier as well as providing more fixing options


  • A multitude of brackets can be made in seconds using the most basic of tools
  • The diamond holes make cutting and bending easier
  • More fixing options
  • Lightweight but strong fixing solution
  • Galvanised coated protection


  • Brackets should only be attached to wall studs if attaching to plaster board walls, or brickwork/masonry (not mortar or grouting).
  • Appropriate heavy duty fasteners should be used.
  • Do not use plastic wall plugs to fix brackets to walls under any circumstances.
  • Make sure the bracket is securely fixed to the wall and all screws are fastened tightly.

The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided falls within the normal range of product properties and relate only to the specific item designated. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability for your particular purposes. Since RCR cannot anticipate all variations in actual end-use conditions, RCR makes no warranties and assumes no liability in connection with any use of this information.

BunningsMitre10Home Timber HardwareThrifty Link