Reinforcing Mending Plates – Zinc Plated

Reinforcing mending plates in a zinc plated finish are suitable for smaller repair jobs and timber joins.

Reinforcing Heavy Duty Galvanised Mending Plates

Product Code A (mm) B (mm) T (mm)
RMF076 76.6 16.3 2.5
RMF100 100 16.5 2.5
RMF126 126.5 19.5 2.5
Z190 190 40 4
B11480 190 40 3.5
B11482 340 40 3.5

Load rating test specifications:

  • Load rating tested at 415mm distance between 2 brackets
  • Bracket is fastened to wall using shortest side of bracket
  • Brackets tested in the orientation below:

 

Stayed Bracket Orientation for Load Rating

Weight capacity of all shelf brackets will always be dependent on the fixing to the wall, distance between brackets and the condition of the wall, the brackets are being fitted to. Weight should be distributed evenly across shelf.

Reinforcing mending plates in a zinc plated finish are suitable for smaller repair jobs and timber joining requirements, such as furniture repairs, kitchen renovations, carpentry projects etc.

Features

  • Zinc plated steel for corrosion resistance
  • Pre-drilled for fasteners

Important:

  • Brackets should only be attached to wall studs if attaching to plaster board walls, or brickwork/masonry (not mortar or grouting).
  • Appropriate heavy duty fasteners should be used.
  • Do not use plastic wall plugs to fix brackets to walls under any circumstances.
  • Make sure the bracket is securely fixed to the wall and all screws are fastened tightly.

The information provided herein corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided falls within the normal range of product properties and relate only to the specific item designated. The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourself the suitability for your particular purposes. Since RCR cannot anticipate all variations in actual end-use conditions, RCR makes no warranties and assumes no liability in connection with any use of this information.

Bunnings

RELATED PRODUCTS